Sziasztok,
A címben szereplő TV bekapcsolás után mutatja a logót, majd újraindul és folyamatosan ezt csinálja.
Gondolom szoftverezni kellene, ehhez kérnék segítséget.
- Honnan lehet letölteni a hozzá való szoftvert?
- Elég egy pendrive-ra rárakni és onnan elindul, vagy direktbe kell programozni a chip-et?
Köszi!
Sziasztok!
Sony KD-55x8005 C Tv.folyamatosan ujra indul.Nem reagál se távra ,se kezelőegységre.Megjelenik a Sony felirat ,majd leáll ,és ujra indul.Táp jónak tűnik.Internet szerint Androidos a tv ,bár ugyanakkor ezek más logóval indulnak az Android verziótól függően.Gugli szerint resetelni kéne ,de nem tudom.
Kérek segítséget!Üdvözlettel Reparator
Sziasztok!
Volna valakinek egy m68lnh060 típusú Sony csöve.Sajna ebben hallott a katód,többször volt már regenerálva így nem érdemes kínlódni vele.
Nekem lehetőleg Debrecenben,illetve környékén lenne jó.
Johny
Screenshots of problem here in the post.
Picture of screen with both cables to panel from TCON connected, and the other is with one side disconnected.
I have read the cables from the TCON to the display loosen up on the end to the panel. I believe as I am working on moving the cables around, the picture is improving
and getting clearer. So I think thats the problem. Someone mentioned using tape over them to hold them to the panel better. I have not taken the metal frame off to
look at them, but there is a narrow gap where I read some people stuff cardboard in there to press down on them better.
Has anyone ever seen this issue and come up with a good way to resecure the cables?